Carpet Cleaning

* 100% Satisfaction Guaranteed *

Payless carpet cleaners uses the most powerful safe and effective method of steam cleaning possible. 
Steam cleaning is preferred in the carpet care industry, because of its ability to penetrate carpet fibers deeply, unlike, for example the popular “dry chemical cleaning” approach, which is more of a surface-cleaning method. 
With the method of steam cleaning, “ghost stains” are less likely to re-appear after cleaning. 
This is because stains are removed from deep within the carpet, not just from the surface level. 
Payless carpet cleaners first treats carpet with a pre-treatment solution, then heavy duty truck-mounted steam cleaning machines work by injecting hot steam deep into the carpet fibers, and extracting dirt as well as cleaning solution residue and moisture.

Our unique heating system maintains the temperature for sanitation. Secondly, by agitation-both with water and vacuum extraction. This helps in the physical removal of particulates or all the bad stuff. 
Third, by the temperature of the cleaning solution. 
Since studies show that there is a temperature loss of 20 to 50 degrees between the cleaning unit and when the cleaning solution actually strikes the carpet, only fuel oil fired heating systems can create the temperatures necessary to reach sanitation levels of 130 degrees and above. 
There is no need to worry about over-wetting or shrinkage. Our company’s primary cleaning solution is a non-toxic citrus based compound, which is not only extremely effective for cleaning, but it us safe enough for pets and babies to crawl on right after cleaning! Since almost all moisture is extracted immediately, carpets are completely dry in 1 to 3 hours.

Long Lasting Deep Clean 
We extract all the dirt, grime & debris of 100% of your carpet yarns. We don’t just buff the surface like some bonnet or carbonation methods (Dry-Chemical Systems) do. With our cleaning process your carpets and rugs will stay cleaner longer because we extract all the dirt & debris.

Kills Germs, Bacteria, and Dust Mites
Our High Powered, Truck-Mounted Steam Extraction process kills and extracts most germs, bacteria, and dust mites from your carpet fibers. 98% of the carpet mills recommends Hot Water Extraction (steam) as the preferred cleaning method. 

We Use Safe-Bio-Degradable Cleaning Agents
The cleaning agents we use are designed for your particular carpet & rug fibers and are safe for children and animals.

No Cleaning Residue Left in Your Carpets
We use rinsing strokes to make sure no cleaning residue is left in your carpet yarns. 
By flushing out all the dirt, grime, and cleaning agents we restore your matted traffic lanes to fluffy and soft carpet fibers with no soap residue making your carpets stay cleaner longer. 

Fast Drying Time
Because of our deep extraction, gas-powered truck mounted equipment, we pick up 98% of the moisture we put down. Only your carpet fibers are barely damp. Depending on the grade of carpeting and the air circulation in your home our drying time is approx. 2-10 hours

We don’t Cut Corners, We Clean Them
We take all the time needed to clean every square inch thoroughly. 

We Move Most Furniture
We move most furniture and place plastic tabs and blocks under the furniture so the carpets will dry properly. 

Hot water extraction & rinsing: 
Our powerful Truck-mounted hot water extraction system provides the necessary cleaning strength to remove the toughest particles and pollutants; hot water is especially effective against biological contaminants. These bio-pollutants, which can cause allergic, infectious or toxic, include:

  • Bacteria, molds and mildew
  • Animal dander
  • Dust mites
  • Viruses
  • Pollen

Fatal error: Uncaught wfWAFStorageFileException: Unable to save temporary file for atomic writing. in /home/paylesscarpetcle/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php:34 Stack trace: #0 /home/paylesscarpetcle/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php(658): wfWAFStorageFile::atomicFilePutContents('/home/paylessca...', '<?php exit('Acc...') #1 [internal function]: wfWAFStorageFile->saveConfig('livewaf') #2 {main} thrown in /home/paylesscarpetcle/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php on line 34